The options discussed on this page are found by selecting Menu --> Setup

To make FLEX open the Till, you need to do three things:


1) Make sure your receipt printer in the Windows Control Panel has the Open Drawer function set - this is done within the Printer Properties and your IT Contractor can help with this.

2) In the How Do I Update a Till Button? page, add a new button with the action "Open Drawer".

3) The Eject command must be entered in PC Settings. This should be ASCII values separated by a +. For the EPSON TMT88V, enter 27+112+48+55+121. Note that this is done on a machine by machine basis.