On the Patient Record, press ‘eGos’ at the top-right, eGos England, then choose GOS3. There are options for “Create new Claim” or “Continue Claim” as per GOS1, plus take-away and retrieval of GOS3 which we will look at in a moment.

  • Choose Create New Claim
  • All the information from the Patient and/or Sight Exam is filled out. FLEX will detail any errors which need resolving. You have options to Select Test… and also to Override Signature Method if you wish to change the input (e.g. for an infirm patient who can’t stand at the desk).
  • Before the patient signs the declaration, they should check the information is correct on the pad / tablet. If not, you should cancel, update their record and try again.



Three signatures are required

  1. Patient x2 – press the signature button to trigger the eSignature method.
  2. Optometrist – see ‘Signing for the day’ above

Press   to trigger the relevant method. The Continue Claim is the same as the GOS1.


Note:

If a patient has no supplements then you can mark this by setting the Prism value in the supplements section to 0